SALE 17% OFF

Click for larger image and other views

Focke Wolf FW190 Parts Set & Plan by Dave Platt

One of aviation history's true masterpieces, the Focke Wolf FW190 has always translated well as an RC model, and in 1/5 scale it is simply magnificent, both to admire on the ground and to handle in flight.

Any version from the A-5 thru A-9, F or G series can be made from the kit. Our prototype above, the top Scale Masters airplane of 1985, is built as an A-8. Either the later (blown) canopy shown, or the more common "flat" canopy is available. Using our normal strong but light wood structure, balance is not a problem and the model does not need the two to four pounds of nose weight required by glass-and-foam kits.

SPECIFICATIONS: Scale 1:5.2 (2.3" = 1') Wingspan 79-1/4". Wing area 1,042 sq. ins. Weight fully equipped 17-20 lbs. Flying speed approx. 80 mph. Engine needed: .90 to 1.8 cu. in. glo 2-cycle.

Your Belair laser cut kit includes major fuselage components, bulkheads, formers, wing ribs, tail parts, dihedral brace, all etched with their plan number - start building as soon as you roll the plan out. Photo shows contents of the Parts Set.

Full size multi-sheet plan included with Parts Set.

Full accessories available from Belair - see below. Landing gear available directly from Sierra Giant Scale.